美國進口威格士靜液傳動器,威格士靜液傳動器電子樣本
企業QQ:2880626086
手機:17302157802
郵箱:17302157802@163.com
For optimum control and power, the
transmissions should be operated at
constant input speeds. When operating the
unit under varying load conditions there can
be noticeable changes in the output speed. If
the output speed decreases due to increased
load, the shift lever should be directed
toward neutral position to increase the
output torque. This produces the same
result as shifting down to a lower gear with a
typical mechanical transmission.
Moving the control lever from neutral to
forward produces one direction of output
shaft rotation. When the lever is in neutral
position, output shaft rotation stops.
這幅圖說明了靜液傳動器與三速齒輪傳動
器相比,其工作時的差異。平滑的曲線表
明靜液傳動器可以提供均勻匹配的扭矩和轉速。
The Model 6 transmission can include a dump
valve which, when actuated, enables the
vehicle to be pushed with the engine off.
Caution: Motor speed must not exceed 350
RPM when the valve is actuated.
齒輪傳動器僅有三個峰值功率點,而靜液
傳動器卻具有無峰值和谷值的連續曲線。
要獲得更大的扭矩,您無需停機并調轉
速,只需將控制手柄向中位處移動,則輸
出扭矩就會增大。
A single control lever connected to the pump
section controls both speed and direction of
the transmission output shaft. Infinite speed
control is achieved by varying the displacement
ratios between the pump and motor.
Movingthe lever from neutral to reverse produces
the opposite output shaft rotation from the
forward position. Output shaft speed
increases as the lever is moved from neutral.
*Axle available through Peerless Axle
Division, Tecumseh Prod. Corp., Clinton,
Michigan.
美國進口威格士靜液傳動器,威格士靜液傳動器電子樣本
021-39526589
網址:lhcdc.com
地 址:上海市嘉定區嘉涌路99弄
6號樓713室